ANDalyze AND1100 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe ANDalyze AND1100. ANDalyze AND1100 16 stron. Fluorimeter for water testing
Drukuj stronęAND1100 Fluorimeter for Water Testing
Options
Power Save: This sets the minutes when the display
will turn black to save power. Settable from 1 to 5
minutes.
Power Off: This is the minutes which the unit will
turn itself off after it goes into power save mode.
Settable from 6 to 15 minutes.
Cuvette Removal: Turning this ON will cause a
screen to appear after each test reminding the user
to remove the cuvette from the sample chamber.
Test Instructions: In the ON position, 4‐step
instructions will display in order when Test is
selected from the home screen. After the 4
the test will begin. In the OFF position, the testing
begins immediately.
Advanced
User can View and Set parameters for each specific sensor. Edit
values using up/down keys and SELECT.
Window: Determines the number of points that will be used to
calculate the rate of fluorescence increase over time. We use a
moving average method to calculate maximum rate. (If the value of
window and samples is same, then the average slope is calculated)
Samples: Total data points taken which determines time up to which
data is collected. A value of 100 is approximately 20 seconds. Increase
sample value, to increase data collection time. Generally an increase
in samples can increase sensitivity especially in matrices such as waste
water.
ANDalyze Inc. 800 Boylston Street, Prudential Tower, Floor 16, Boston, MA 02199 USA Tel. +1 857.453.6740 www.andalyze.com
th
step,
Sensor Lot: Turning this option ON allows the user to
enter the lot number of the sensors at the time of a
site calibration. This helps to identify when a new site
calibration is required (new lot batch).
Temperature: Turning this option ON allows the user
to enter the temperature of the sample water at the
time of a site calibration. This helps to identify when a
new site calibration is required (significant change in
water temperature).
Temperature Units: Switch between Celsius and
Fahrenheit for temperature entry and displays.
Display Contrast: Adjusts the brightness of the display.
Higher value indicates a brighter display.
Language: Choose between English, Chinese,
Portuguese, Spanish and German languages for the
fluorimeter displays.
Page 9 of 16
July 1, 2013