Andamiro KING OF THE HAMMER Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andamiro KING OF THE HAMMER. Andamiro KING OF THE HAMMER 14 pages.
Imprimer la page- 1. Table of Contents
- 1. Precautions
- 1. Notes for Transference
- 2. Specifications
- 3. Product Composition & Name of each Part
- 3. Composition
- 3. Inside of Hitting Plate
- 3. Sort of PCB and Circuit Diagram
- 3. How to Control and Set the Mode
- 3. Part List
- 3. Trouble Shooting & Maintenance
- 3. How to Assemble
7. Trouble Shooting & Maintenance
□ In case of loosening a screw bolt
Tighten a screw bolt by using 10mm lens tool once a week
□ In case that the sensor is not checked
* Loosen Solenoid and S.P small-shaped part.
Grind processed part of ㄱ-shape with grinding tool such as a hand grinder.
When grinded too much, the Solenoid will not work well. Recommended grinding depth
is approximately 1mm.
□ In case a hitting plate does not go up
* Solenoid works very well when a small amount of grease is applied on the processed
part of ㄱ-shape.
□ In case of PCB problem
13