Andamiro KING OF THE HAMMER 사용자 설명서 - 페이지 13
{카테고리_이름} Andamiro KING OF THE HAMMER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andamiro KING OF THE HAMMER 14 페이지.
페이지 인쇄- 1. Table of Contents
- 1. Precautions
- 1. Notes for Transference
- 2. Specifications
- 3. Product Composition & Name of each Part
- 3. Composition
- 3. Inside of Hitting Plate
- 3. Sort of PCB and Circuit Diagram
- 3. How to Control and Set the Mode
- 3. Part List
- 3. Trouble Shooting & Maintenance
- 3. How to Assemble
7. Trouble Shooting & Maintenance
□ In case of loosening a screw bolt
Tighten a screw bolt by using 10mm lens tool once a week
□ In case that the sensor is not checked
* Loosen Solenoid and S.P small-shaped part.
Grind processed part of ㄱ-shape with grinding tool such as a hand grinder.
When grinded too much, the Solenoid will not work well. Recommended grinding depth
is approximately 1mm.
□ In case a hitting plate does not go up
* Solenoid works very well when a small amount of grease is applied on the processed
part of ㄱ-shape.
□ In case of PCB problem
13