Carmanah G Series Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah G Series. Carmanah G Series 18 pages. Rrfb mast arm kit
Également pour Carmanah G Series : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel de l'utilisateur (18 pages), Manuel d'installation (14 pages), Manuel (10 pages), Manuel (10 pages)

5. Form a cable strain relief loop and secure cable jacket and red and green conductors to the inner light bar

bracket as shown - using the small cable ties supplied with the light bar.

Position the cable ties on the chamfered edges of the inner light bar bracket to provide clearance

for the light bar cover to slide past the cable during the final assembly steps.

6. Once the cable is secured, cut the single conductors to length.

7. Strip the ends of the single conductors, and usng a small blade screwdriver, depress the spring plunger

on the terminals and insert each conductor into the correct postions as indicated. Ensure that the

conductors are being retained properly by performing a light pull test on each one.

For correct RRFB operation and MUTCD compliance, the black and white conductors must be

landed on the left-hand side light bar, LED module.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RRFB MAST ARM INSTALL GUIDE

carmanah.com