Carmanah G Series 설치 매뉴얼 - 페이지 14

{카테고리_이름} Carmanah G Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah G Series 18 페이지. Rrfb mast arm kit
Carmanah G Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 사용자 설명서 (18 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지)

5. Form a cable strain relief loop and secure cable jacket and red and green conductors to the inner light bar

bracket as shown - using the small cable ties supplied with the light bar.

Position the cable ties on the chamfered edges of the inner light bar bracket to provide clearance

for the light bar cover to slide past the cable during the final assembly steps.

6. Once the cable is secured, cut the single conductors to length.

7. Strip the ends of the single conductors, and usng a small blade screwdriver, depress the spring plunger

on the terminals and insert each conductor into the correct postions as indicated. Ensure that the

conductors are being retained properly by performing a light pull test on each one.

For correct RRFB operation and MUTCD compliance, the black and white conductors must be

landed on the left-hand side light bar, LED module.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RRFB MAST ARM INSTALL GUIDE

carmanah.com