Carmanah R820-G Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Carmanah R820-G. Carmanah R820-G 10 pages. Cabinet-based systems
Également pour Carmanah R820-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel d'installation (14 pages), Manuel (10 pages), Manuel (10 pages)

3.4

Wiring Door Switch Terminal

Connect terminal shown uncrimped. Crimp wings will be bent over wire strands.

1. Insert terminal from door switch harness into Position 2 of AI harness connector. Orient terminal same

way as other terminals present in connector. Tug to confirm it's fully inserted.

2. Tighten and trim all cable ties from previous steps.

3.5

1. Ensure all connectors are properly mated on the bottom of the AI unit.

2. Confirm correct wiring and power-up system by connecting the DC power, installing fuses, and turning on

AI power switch.

3. On your PC, open a web browser and navigate to the Glance website: glance.appinfoinc.com.

4. Log in using the credentials provided by AI.

5. On the upper left side of the browser, select the device name that matches the Device ID (the ID number

labelled on the AI unit).

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com