Carmanah R820-G Manual - Page 8

Browse online or download pdf Manual for Construction Equipment Carmanah R820-G. Carmanah R820-G 10 pages. Cabinet-based systems
Also for Carmanah R820-G: Quick Start Manual (16 pages), Manual (11 pages), Energy Management System Replacement Manual (12 pages), Cabinet Door Replacement Manual (10 pages), Manual (9 pages), Install Manual (14 pages), Manual (10 pages), Manual (10 pages)

Print Page

3.4

Wiring Door Switch Terminal

Connect terminal shown uncrimped. Crimp wings will be bent over wire strands.

1. Insert terminal from door switch harness into Position 2 of AI harness connector. Orient terminal same

way as other terminals present in connector. Tug to confirm it's fully inserted.

2. Tighten and trim all cable ties from previous steps.

3.5

1. Ensure all connectors are properly mated on the bottom of the AI unit.

2. Confirm correct wiring and power-up system by connecting the DC power, installing fuses, and turning on

AI power switch.

3. On your PC, open a web browser and navigate to the Glance website: glance.appinfoinc.com.

4. Log in using the credentials provided by AI.

5. On the upper left side of the browser, select the device name that matches the Device ID (the ID number

labelled on the AI unit).

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com