ATI Technologies XCLAIM TV Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ATI Technologies XCLAIM TV. ATI Technologies XCLAIM TV 15 pages.
Également pour ATI Technologies XCLAIM TV : Manuel d'installation (16 pages)

Imprimer la page

Sound Input port

Audio Output

Connect the audio cable to

the Sound Input port OR

to externally-powered speakers

Connecting Video Equipment to XCLAIM TV

If you are planning to use XCLAIM VR to capture video

and sound from a VCR, camcorder or other external video

equipment, you should make the connections using the

composite video and audio input connectors on your

XCLAIM TV tuner. These connectors provide a 'pass-

through' function that routes the video and sound from the

external equipment to your XCLAIM VR card. Once you

have made the appropriate connections, simply select

'S-Video' as your input source using the Remote Control

palette to enable the pass-through function (refer to the

Xclaim Video Player User's Guide for help in selecting video

sources).

To make the connections, you can use three separate

cables, or an all-in-one cable (three joined cables – one

video and two audio) with RCA connectors at each end

(available at most electronic supply stores). The yellow

connector is for the composite video signal, the red

connector is for the right channel audio, and the white

connector is for the left channel audio (refer to the

illustration on the next page).

Page 5