ATI Technologies XCLAIM TV Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kartu Video ATI Technologies XCLAIM TV. ATI Technologies XCLAIM TV 15 halaman.
Juga untuk ATI Technologies XCLAIM TV: Panduan Instalasi (16 halaman)

Sound Input port
Audio Output
OR
Connect the audio cable to
the Sound Input port OR
to externally-powered speakers
Connecting Video Equipment to XCLAIM TV
If you are planning to use XCLAIM VR to capture video
and sound from a VCR, camcorder or other external video
equipment, you should make the connections using the
composite video and audio input connectors on your
XCLAIM TV tuner. These connectors provide a 'pass-
through' function that routes the video and sound from the
external equipment to your XCLAIM VR card. Once you
have made the appropriate connections, simply select
'S-Video' as your input source using the Remote Control
palette to enable the pass-through function (refer to the
Xclaim Video Player User's Guide for help in selecting video
sources).
To make the connections, you can use three separate
cables, or an all-in-one cable (three joined cables – one
video and two audio) with RCA connectors at each end
(available at most electronic supply stores). The yellow
connector is for the composite video signal, the red
connector is for the right channel audio, and the white
connector is for the left channel audio (refer to the
illustration on the next page).
Page 5