Bosch Professional GWS 800 Manuel d'instructions original - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Bosch Professional GWS 800. Bosch Professional GWS 800 23 pages.

Imprimer la page

failure or when the mains plug is pulled. This prevents

uncontrolled restarting.

Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for cutting, roughing and brush-

ing metal and stone materials without the use of water.

A separate protective guard for cutting must be used when

cutting with bonded abrasives.

Sufficient dust extraction must be provided when cutting

stone.

With approved abrasive tools, the power tool can be used for

sanding with sanding discs.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Spindle lock button

(2) On/off switch

(3) Combination wrench for M10 grinding spindle

(4) Auxiliary handle (insulated gripping surface)

(5) Protective guard for grinding

(6) Protective guard for cutting

(7) Locking screw for protective guard

(8) Mounting flange with O‑ring

(9) Grinding disc

(10) Carbide grinding head

(11) Cutting disc

(12) Clamping nut

(13) Grinding spindle

(14) Hand guard

Bosch Power Tools

(15) Rubber sanding pad

(16) Abrasive disc

(17) Round nut

(18) Cup brush

(19) Handle (insulated gripping surface)

(20) Extraction guard for cutting with cutting guides

(21) Diamond cutting disc

a) Accessories shown or described are not included with the

Technical Data

Angle Grinder

Article number

Rated power input

Power output

Rated speed

Max. grinding disc diameter

Grinding spindle thread

Max. thread length of grinding

spindle

Weight according to EPTA-Procedure 01:2014

– with low-vibration auxiliary

– with standard auxiliary

Protection class

The specifications apply to a rated voltage [U] of 230 V. These spe-

cifications may vary at different voltages and in country-specific mod-

els.

Fitting

Fitting Protective Equipment

Note: If the grinding disc breaks during operation or the

holding fixtures on the protective guard/power tool become

damaged, the power tool must be sent to the after-sales ser-

vice immediately; see the "After-Sales Service and Applica-

tion Service" section for addresses.

product as standard. You can find the complete selection of

accessories in our accessories range.

handle

Pull the plug out of the socket before carrying out any

work on the power tool.

1 609 92A 7C2 | (11.08.2022)

English | 9

GWS 800

3 601 C94 3..

800

460

min

11,000

–1

100

M 10

1.6

1.5

/ II