CARNES HXHAF Manuel du propriétaire et manuel de référence - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et manuel de référence pour {nom_de_la_catégorie} CARNES HXHAF. CARNES HXHAF 20 pages.
Imprimer la page
1-Wire Control
|
RESIDENTIAL HUMIDISTAT
Factory Default
Selecting Factory Default will revert the humidistat back to factory settings.
The humidistat will set back to Heat-Only Mode, with a 45%RH setpoint, and
temperature units of Fahrenheit.
1-Wire Control
1-Wire Control requires that the humidistat to be wired correctly to a
smart thermostat or HVAC controller. 1-Wire Control mode allows the user to
utilize the humidistat as a control bypass from a smart thermostat. This
function gives control of the humidifier to a smart thermostat that has a one wire
humidifier control output. When the humidistat operates in this mode, it
discards any internal setpoint settings and only displays measured humidity and
temperature. If the thermostat sends a signal out for the humidifier to run,
the humidistat will accept the signal and turn the humidifier on at maximum
output. The humidifier will then run until the smart thermostat sends an off
signal to the humidistat.
18
Form 16763