CARNES HXHAF 사용 설명서 및 참조 설명서 - 페이지 18

{카테고리_이름} CARNES HXHAF에 대한 사용 설명서 및 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CARNES HXHAF 20 페이지.

RESIDENTIAL HUMIDISTAT

Factory Default

Selecting Factory Default will revert the humidistat back to factory settings.

The humidistat will set back to Heat-Only Mode, with a 45%RH setpoint, and

temperature units of Fahrenheit.

1-Wire Control

1-Wire Control requires that the humidistat to be wired correctly to a

smart thermostat or HVAC controller. 1-Wire Control mode allows the user to

utilize the humidistat as a control bypass from a smart thermostat. This

function gives control of the humidifier to a smart thermostat that has a one wire

humidifier control output. When the humidistat operates in this mode, it

discards any internal setpoint settings and only displays measured humidity and

temperature. If the thermostat sends a signal out for the humidifier to run,

the humidistat will accept the signal and turn the humidifier on at maximum

output. The humidifier will then run until the smart thermostat sends an off

signal to the humidistat.

Form 16763