Anderson M-115 Manuel du propriétaire - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Anderson M-115. Anderson M-115 18 pages. Log loader on a r-flex 410 trailer
Imprimer la page
2.1 Basic Components (continued) :
Moving the standard (non hydraulic) tandem axle: When the loader is
empty you can manually move forward or backward the tandem axle by 4 inches
(10.16cm) by taking out the bolt that connects it to the central beam. Once you
move the axle you will need to put the bolt back in place. This operation is done to
better balance the load between the tractor and the loader.
2.2 Control valve :
A total of 5 basic levers are available for the operator when he is operating
the unit. There are 2 multi purpose joysticks in the front and 3 simple levers behind.
For the 3 back levers group, the left and right levers will lower and raise the left and
right stabilizing legs. The central lever will open and close the grapple.
The right multi purpose joystick controls the primary boom (up down
movement) and the grapple rotation (left right movement). The left multi purpose
joystick controls the secondary boom (up down movement) and the central mast
rotation (left right movement).
Leg
left
Mast
Rotation
Cold weather operation : It is important to let the unit (or tractor) idle for a few minutes before
activating the joysticks. Following this procedure will ensure sure that you will allow the oil to warm up and
circulate freely throughout all components for a few extra minutes to stabilize the oil temperature before
operating your machine with a load.
At all times you must AVOID moving the boom at full speed out to full extension. This sudden operation
can seriously damage the machine.
2 Loader M-115 General
Control box schematic
Grapple -
Secondary (stick)
Boom
Characteristics
(continues).
open/close
Primary boom
Bolt
Leg
Right
Grapple
Rotation
(or bucket optional)
9