- ページ 10

実用車 Anderson M-115のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anderson M-115 18 ページ。 Log loader on a r-flex 410 trailer

2.1  Basic Components (continued) :

Moving the standard (non hydraulic) tandem axle: When the loader is

empty you can manually move forward or backward the tandem axle by 4 inches

(10.16cm) by taking out the bolt that connects it to the central beam. Once you

move the axle you will need to put the bolt back in place. This operation is done to

better balance the load between the tractor and the loader.

2.2  Control valve :

A total of 5 basic levers are available for the operator when he is operating

the unit. There are 2 multi purpose joysticks in the front and 3 simple levers behind.

For the 3 back levers group, the left and right levers will lower and raise the left and

right stabilizing legs. The central lever will open and close the grapple.

The right multi purpose joystick controls the primary boom (up down

movement) and the grapple rotation (left right movement). The left multi purpose

joystick controls the secondary boom (up down movement) and the central mast

rotation (left right movement).

Leg

left

Mast

Rotation

Cold weather operation : It is important to let the unit (or tractor) idle for a few minutes before

activating the joysticks. Following this procedure will ensure sure that you will allow the oil to warm up and

circulate freely throughout all components for a few extra minutes to stabilize the oil temperature before

operating your machine with a load.

At all times you must AVOID moving the boom at full speed out to full extension. This sudden operation

can seriously damage the machine.

2  Loader M-115 General

Control box schematic

Grapple -

Secondary (stick)

Boom

Characteristics

(continues).

open/close

Primary boom

Bolt

Leg

Right

Grapple

Rotation

(or bucket optional)