Carnival King 382CCME21 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Carnival King 382CCME21. Carnival King 382CCME21 3 pages. Cotton candy machine

Imprimer la page

www.CarnivalKingSupplies.com

COTTON CANDY MACHINE MANUAL

General Safety Precautions

1. This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and

instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Factors

such as caution and common sense cannot be built into this product and it is trusted the operator will follow these

measures.

2. This machine must never be modified and should only be used for its intended purpose.

3. Always check that the cotton candy machine is plugged into a grounded outlet with the appropriate electrical

supply. Ensure that the wall outlet being used is properly grounded. If it is not, you must install a grounded outlet.

Have the work performed only by a certified electrician who is properly qualified to meet local safety and electrical

codes.

4. Before disconnecting from the power source, be sure that all switches have been turned OFF. To unplug the

machine, firmly grasp the plug and remove from the outlet – never pull on the cord itself.

5. Ensure that the power outlet, plug and cord being used are in good, working condition. Damaged components

should be repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even with a

properly functioning power cord, keep water away from the cord and avoid letting your power cord run over carpets

or heating devices.

6. If missing or broken components are found, leave the machine TURNED OFF. Do not attempt to use it. Contact a

qualified service technician to make all repairs.

7. No one under 18 should operate this machine unsupervised.

8. Keep hands, foreign objects, and loose clothing away from the spinning head while in use.

9. Always use the machine in a clean and dry area.

Operating Instructions

1. Install the bowl on top of the base using the 4 clamps located on the sides of the base. Make sure the bowl is not

in contact with the heating head. Place floss bubble shield (optional) on top of the bowl.

2. Connect the power cord to the base and plug it into a grounded outlet.

3. Switch both the "power" and "heat" switches to the ON position. Both switches will light up when turned on.

4. Allow the machine 2-3 minutes to heat prior to use.

5. Add floss sugar directly into the well in the heating head using the floss scoop. Do not overfill.

6. Cotton candy will begin to spin around the bowl as the heater head continues to operate. As the cotton candy

accumulates, it will build up and come out through the top of the spinner head. You will need to collect the cotton

candy as it comes out of the top of the unit.

7. Allow the machine to cool down for 15-20 minutes after an hour of continuous use.

Cotton Candy Machine Specs

Item#

Base Dimensions

Bowl Dimensions

Voltage

Wattage

Yield

Intertek

382CCME21

12.5" x 12.5" x 12.5"

21" Diameter

110V

1080W

2 Cones/Minute