Andersson CNA 2.0 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andersson CNA 2.0. Andersson CNA 2.0 5 pages. Caravan antenna
Imprimer la page
Instructions
Installation on magnetic base
1. Insert the coaxial cable from the bottom of the antenna
base and fix it in the cable gap of the base.
2. Fix the antenna base to the magnetic base with screws.
3. Plug the coaxial cable's female F connector to the an-
tenna's male F connector.
4. Place the antenna head on the base, rotate it clockwise
until it is well positioned and secured, fix it tight with the
provided screws.
5. Loosen the wing nuts from the antenna base. Insert pole,
and tighten the wing nuts.
6. Connect the cables to the adapter.
7. Insert the adapter cable into the TV's antenna connection.
3
1
2
4
6
Installation with pole
1. Put the signal wire through the pole until the F connector
comes out.
2. Insert the F connector into the F socket of the antenna
then screw tight.
3. Loosen the wing nuts from the antenna base. Insert the
pole then tighten the wing nuts.
4. Connect the cables to the adapter.
5. Insert the adapter cable into the TV's antenna connec-
tion.
Specifications
Input voltage
DC 12 V or 230 V 50 Hz
Working voltage
DC12V/50mA
Opening angle
Omni directional
Reception frequency
VHF 174-230 Mhz
UHF 470-862 Mhz
Contains
Antenna / user manual / AC adapter
/ Car adapter / Amplifier
3