Andersson CNA 2.0 Kullanıcı Kılavuzu - Sayfa 3

Anten Andersson CNA 2.0 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Andersson CNA 2.0 5 sayfaları. Caravan antenna

Instructions

Installation on magnetic base

1. Insert the coaxial cable from the bottom of the antenna

base and fix it in the cable gap of the base.

2. Fix the antenna base to the magnetic base with screws.

3. Plug the coaxial cable's female F connector to the an-

tenna's male F connector.

4. Place the antenna head on the base, rotate it clockwise

until it is well positioned and secured, fix it tight with the

provided screws.

5. Loosen the wing nuts from the antenna base. Insert pole,

and tighten the wing nuts.

6. Connect the cables to the adapter.

7. Insert the adapter cable into the TV's antenna connection.

Installation with pole

1. Put the signal wire through the pole until the F connector

comes out.

2. Insert the F connector into the F socket of the antenna

then screw tight.

3. Loosen the wing nuts from the antenna base. Insert the

pole then tighten the wing nuts.

4. Connect the cables to the adapter.

5. Insert the adapter cable into the TV's antenna connec-

tion.

Specifications

Input voltage

DC 12 V or 230 V 50 Hz

Working voltage

DC12V/50mA

Opening angle

Omni directional

Reception frequency

VHF 174-230 Mhz

UHF 470-862 Mhz

Contains

Antenna / user manual / AC adapter

/ Car adapter / Amplifier