Andesfit Health ADF-B27 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andesfit Health ADF-B27. Andesfit Health ADF-B27 18 pages.
Imprimer la page
THE TWO MEASURING MODES
The meter provides you with two modes for measuring, General
and CTL. The CTL mode should be used when a control solution
is being tested. See the table below.
CTL
You can switch between each mode by:
1. Start with the meter turned off. Insert a test
strip to turn on the meter, the screen will dis-
play a flashing blood drop.
2. Press "S" to select General or CTL mode.
testing with the control solution
TESTING WITH BLOOD SAMPLE
o reduce the chances of infection:
● Choose a clean, dry work surface.
●
● Always use a new and sterile lancet. Lancets are for single
use only.
●
● Avoid getting lotion、oils、dirt or debris in or on the lancet
and lancing device.
Note: Before testing, please read the following steps thoroughly
and carefully, please relax and do the test step by step. Simplif-
ying or changing the test procedure may produce inaccurate
results.