Andesfit Health ADF-B27 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengukur Glukosa Darah Andesfit Health ADF-B27. Andesfit Health ADF-B27 18 halaman.

THE TWO MEASURING MODES

The meter provides you with two modes for measuring, General

and CTL. The CTL mode should be used when a control solution

is being tested. See the table below.

CTL

You can switch between each mode by:

1. Start with the meter turned off. Insert a test

strip to turn on the meter, the screen will dis-

play a flashing blood drop.

2. Press "S" to select General or CTL mode.

testing with the control solution

o reduce the chances of infection:

● Choose a clean, dry work surface.

●

● Always use a new and sterile lancet. Lancets are for single

use only.

●

● Avoid getting lotion、oils、dirt or debris in or on the lancet

and lancing device.

Note: Before testing, please read the following steps thoroughly

and carefully, please relax and do the test step by step. Simplif-

ying or changing the test procedure may produce inaccurate

results.