DREAMS Jay Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DREAMS Jay. DREAMS Jay 16 pages. Ottoman bed
Également pour DREAMS Jay : Manuel d'instructions de montage (18 pages)

Imprimer la page

ii)

Carefully lay the slat frame

on to the top of the support

bars making sure the bed is

still square and there is an

even gap all round as in the

sketch.

Lift the frame and slide the piston stems onto the lower axles then fit

the lock-nuts (h). Tighten them with spanner (j) but note, a small

2mm gap is needed so stems can move freely.

This is important so do not over-tighten - please see the sketch -->

x12

Tighten all six bolt sets 100% using spanner (j) & Allen key (d).

Jay Ottoman Bed - Assembly guide - Page 10

Using three bolt sets on each side (e, c, c, b & i),

fix the slat frame loosely to the support bars.

Bolt into centre of long holes

2mm