DREAMS Jay 매뉴얼 - 페이지 10

{카테고리_이름} DREAMS Jay에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAMS Jay 16 페이지. Ottoman bed
DREAMS Jay에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (18 페이지)

ii)

Carefully lay the slat frame

on to the top of the support

bars making sure the bed is

still square and there is an

even gap all round as in the

sketch.

Lift the frame and slide the piston stems onto the lower axles then fit

the lock-nuts (h). Tighten them with spanner (j) but note, a small

2mm gap is needed so stems can move freely.

This is important so do not over-tighten - please see the sketch -->

x12

Tighten all six bolt sets 100% using spanner (j) & Allen key (d).

Jay Ottoman Bed - Assembly guide - Page 10

Using three bolt sets on each side (e, c, c, b & i),

fix the slat frame loosely to the support bars.

Bolt into centre of long holes

2mm