ANDILOG CENTOR FIRST II Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ANDILOG CENTOR FIRST II. ANDILOG CENTOR FIRST II 12 pages.
Imprimer la page
high speed a frame does not stop immediately and the risks of damaging the sensor are important due
1.2.3. Building
to the inertia of the motor.
The force gauge can be fixed on a frame using M5 screws. The length of the screws used should not
exceed 3mm inside the instrument. Contact Andilog if you need more information or if you want an
1.2.4. Precautions during testing
adapter to mount the instrument on a rack.
Most of the tests performed with Andilog Technologies instruments are destructive tests. The hazards
associated with this type of testing require that our instruments be used by experienced and trained
operators. Due to the nature and use of the equipment sold by Andilog, the purchaser's acceptance of
Andilog Technologies' products constitutes acceptance of the risks and damages that may result from
1.2.5. Environmental conditions
the use of Andilog's instruments.
•
Operating temperature : 0 to 35° C
•
Storage temperature: -20 to 45° C
•
Relative humidity: 5% to 95%, non-condensing
1.2.6. Warranty
•
Maximum altitude of use : 3 000 m
Subject to the conditions below, Andilog Technologies warrants to the
purchaser that it will repair or replace at no charge new instruments sold
subject to normal use and maintenance. This warranty applies if the
purchaser detects a defect in workmanship or materials during a period of
two (2) years from the date of shipment.
The conditions of application are:
ANDILOG Technologies has been notified in writing of the defect
•
before the end of the warranty period
Products are shipped to Andilog Technologies with prior agreement
•
from Andilog Technologies
All transportation costs are paid by the buyer
•
The products have been used and maintained under normal conditions of use
•
Any repair or replacement made by the seller outside the agreement of Andilog Technologies will void
the warranty.
In no event shall Andilog Technologies be liable for any damages, business interruption, or loss of
production due to the purchase, use, or failure of our products. And this even if Andilog Technologies
has been informed of the possibility of such damages.
- 4 -
User's manual
CENTOR FIRST II