ANDILOG CENTOR FIRST II Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur ANDILOG CENTOR FIRST II. ANDILOG CENTOR FIRST II 12 halaman.

high speed a frame does not stop immediately and the risks of damaging the sensor are important due

1.2.3. Building

to the inertia of the motor.

The force gauge can be fixed on a frame using M5 screws. The length of the screws used should not

exceed 3mm inside the instrument. Contact Andilog if you need more information or if you want an

adapter to mount the instrument on a rack.

Most of the tests performed with Andilog Technologies instruments are destructive tests. The hazards

associated with this type of testing require that our instruments be used by experienced and trained

operators. Due to the nature and use of the equipment sold by Andilog, the purchaser's acceptance of

Andilog Technologies' products constitutes acceptance of the risks and damages that may result from

the use of Andilog's instruments.

•

Operating temperature : 0 to 35° C

•

Storage temperature: -20 to 45° C

•

Relative humidity: 5% to 95%, non-condensing

1.2.6. Warranty

•

Maximum altitude of use : 3 000 m

Subject to the conditions below, Andilog Technologies warrants to the

purchaser that it will repair or replace at no charge new instruments sold

subject to normal use and maintenance. This warranty applies if the

purchaser detects a defect in workmanship or materials during a period of

two (2) years from the date of shipment.

The conditions of application are:

ANDILOG Technologies has been notified in writing of the defect

•

before the end of the warranty period

Products are shipped to Andilog Technologies with prior agreement

•

from Andilog Technologies

All transportation costs are paid by the buyer

•

The products have been used and maintained under normal conditions of use

•

Any repair or replacement made by the seller outside the agreement of Andilog Technologies will void

the warranty.

In no event shall Andilog Technologies be liable for any damages, business interruption, or loss of

production due to the purchase, use, or failure of our products. And this even if Andilog Technologies

has been informed of the possibility of such damages.

- 4 -

User's manual

CENTOR FIRST II