Caroma G Series Manuel d'installation et d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Caroma G Series. Caroma G Series 16 pages. Electronic soap dispenser
Également pour Caroma G Series : Manuel d'instructions d'installation et d'entretien (16 pages), Manuel d'instructions d'installation et d'entretien (16 pages), Manuel d'installation et d'entretien (17 pages)

REMOTE CONTROL FUNCTIONS (OPTIONAL)

If you purchase the remote control together with your soap dispenser, you may adjust

the dispenser settings if required. To use the remote control hold it straight in front of

the sensor at a distance of about 10-15 cm.

Attention: The remote control held out of the recommended range (too close or too far)

will not operate.

The remote control can be used to adjust the following functions:

1-SOAP QUANTIT Y

The 1-4 drop keys allow the user to choose the desired soap quantity.

0.7 to 0.9

Indication: continuous blinking of the LED in the sensor eye.

*The exact dosage depends on soap viscosity.

2-ADJ

This function resets the sensor back to factory

settings.

Indication: 2 blinks of the LED in the sensor eye.

3-TEMPORARY OFF FUNCTION

This function is ideal to perform any kind of activity

in front of the sensor without operating the system

(for example, cleaning). The soap dispenser will

remain shut for one minute when this button is

pressed once.

To cancel this function and to return to normal

operation press the On/Off button again or wait for

one minute.

Indication: OFF – 2 fast blinks, ON – 4 fast blinks

4-FILL THE SOAP TANK

Once the soap tank has been filled / re-filled, press

the FILL button. The pump will run for one minute

for priming the soap to the soap dispenser spout.

To stop this activity press the FILL button again. If

the soap has not started coming out of the spout,

press the Fill button again.

1.2 to 1.6

1.6 to 1.9

2.1 to 2.3