DREAMVISION T9006000 Assemblage et étalonnage - Page 7

Parcourez en ligne ou téléchargez le pdf Assemblage et étalonnage pour {nom_de_la_catégorie} DREAMVISION T9006000. DREAMVISION T9006000 16 pages. Theatre system kit for inti

Imprimer la page

With a source connected, you can use the Anamorphic Mode feature to automatically engage/disengage the lens

when needed:

Browse into the projector Menu ⇒ ⇒ ⇒ ⇒ Function ⇒ ⇒ ⇒ ⇒ Trigger ⇒ ⇒ ⇒ ⇒ ON (Anamo)

•

Menu ⇒ ⇒ ⇒ ⇒ Installation ⇒ ⇒ ⇒ ⇒ Anamorphic Mode ⇒ ⇒ ⇒ ⇒ Mode A

•

Adjust the horizontal position

To adjust the horizontal position of the picture into the screen, release the 2 screws (A) and turn the Anamorphic

Lens left or right to obtain a centered 2.35 picture. Tighten the screws when completed. This adjustment can also be

achieved by using the Horizontal Lens Offset.

The Horizontal Lens Offset should be used only for ﬁne adjustments. The use of the maximum 34%

horizontal offset may decrease the overall picture quality..

R699802 - THEATER System Kit for Inti

To engage the anamorphic lens, set the 12V trigger to High state.

2.0 L

ENS ALIGNMENT