DREAMVISION T9006000 조립 및 보정 - 페이지 7

{카테고리_이름} DREAMVISION T9006000에 대한 조립 및 보정을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAMVISION T9006000 16 페이지. Theatre system kit for inti

With a source connected, you can use the Anamorphic Mode feature to automatically engage/disengage the lens

when needed:

Browse into the projector Menu ⇒ ⇒ ⇒ ⇒ Function ⇒ ⇒ ⇒ ⇒ Trigger ⇒ ⇒ ⇒ ⇒ ON (Anamo)

•

Menu ⇒ ⇒ ⇒ ⇒ Installation ⇒ ⇒ ⇒ ⇒ Anamorphic Mode ⇒ ⇒ ⇒ ⇒ Mode A

•

Adjust the horizontal position

To adjust the horizontal position of the picture into the screen, release the 2 screws (A) and turn the Anamorphic

Lens left or right to obtain a centered 2.35 picture. Tighten the screws when completed. This adjustment can also be

achieved by using the Horizontal Lens Offset.

The Horizontal Lens Offset should be used only for ﬁne adjustments. The use of the maximum 34%

horizontal offset may decrease the overall picture quality..

R699802 - THEATER System Kit for Inti

To engage the anamorphic lens, set the 12V trigger to High state.

2.0 L

ENS ALIGNMENT