Andisoon Measure T635 Series Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andisoon Measure T635 Series. Andisoon Measure T635 Series 10 pages. Hydrogen refueling nozzle

Imprimer la page

I. Product Introduction

This hydrogen refueling nozzle is designed into an automatic locking

structure. After the head of the hydrogen refueling nozzle and the

hydrogen refueling port are connected in place, the internal claws of the

hydrogen refueling nozzle automatically block and lock the hydrogen

refueling port, so as to form a reliable mechanical connection between the

hydrogen refueling nozzle and the hydrogen refueling port. After the

successful communication between the hydrogen refueling nozzle and the

on-board system, press the hydrogen filling button on the hydrogen

dispenser, and the high-pressure hydrogen flows to the on-board cylinder

at the rear end of the hydrogen refueling port through the hydrogen

refueling nozzle, so as to realize the function of vehicle hydrogen filling;

after filling, the hydrogen refueling nozzle can release the pressure of the

gas in the chamber of the hydrogen refueling nozzle through the valve

switch of the pipeline in the hydrogen dispenser. After the pressure relief,

manually slide the outer sliding sheath on the head of the hydrogen

refueling nozzle backward to separate the hydrogen refueling nozzle from

the hydrogen refueling port and complete the whole filling process.

1. Hose sheath 2. Nozzle head 3. Outer sliding sheath 4. Infrared receiver

module