ATL Product Berkshire 600 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ATL Product Berkshire 600. ATL Product Berkshire 600 8 pages.

Imprimer la page

1. User Guide

Preparing to use your

Berkshire 600

INITIAL CHECK

Our telephones are checked, tested and leave us

in perfect condition. If yours is damaged, please

return it to your supplier with proof of purchase, for

a replacement.

TELEPHONE NUMBER LABEL

The telephone incorporates a label underneath the

handset for recording frequently used telephone

numbers. To remove the plastic cover, operate the

release clip with your thumb nail and hinge upward.

CONNECTION

The Berkshire 600 telephone can be connected

either to a Direct Exchange Line, or as an extension

to a compatible company exchange (PABX).

HANDSET CORD

This cord will require connection between the

telephone and handset. Take any end of the handset

cord, and locate the port marked 'HANDSET' on the

left hand side of the Berkshire 600, and simply push

to locate. Connect the other end to the base of the

handset to complete.

LINECORDS

The Berkshire 600 arrives with two line cords for

customer selection. Select your required linecord

(standard BS6312 BT-socket, or RJ45 socket for

category 5 installations). The rear of the telephone

has a port marked 'LINE', plug your selected

linecord into this port ﬁ rst, and the other end to your

telephone line termination point. An RJ11 line cord is

available as an option, ask your supplier for details.

For certain non UK customers, the RJ11 linecord

may be included as standard.

WALL AND DESK MOUNTING KITS

A wall mounting kit is available as an option, please

contact your supplier for further information.

Using your Berkshire 600

with the Handset

RECEIVING CALLS

Incoming calls will be announced by the audible

ringer and ﬂ ashing LED. To answer the call, simply

lift the handset. This will also activate the display,

showing time, date, and call time. Refer to the

LCD section of this guide for more detail on how

to conﬁ gure, including adjustment of the viewing

angle.

ADJUSTING YOUR RINGER-VOLUME

The ringer volume is controlled by a 3 position switch

located at the rear of the telephone, and indicated by

the word 'ringer'. Moving through the settings from

left to right they are HIGH, MED and LOW.

ADJUSTING YOUR RINGER PITCH

The ringer pitch control is also a 3 position switch

located at the rear of the telephone, and indicated

by the words 'RINGER PITCH'. Settings from left to

right are HIGH, MED and LOW.

MAKING A CALL VIA THE HANDSET

•

Pick up the handset and listen for dial tone

•

Dial the required telephone number

(Note: making external calls from a company

exchange (PABX) requires the number to be preﬁ xed

by an access digit, notmally '9')

USING YOUR BERKSHIRE 600 WITH HEADSET

CONNECTING THE HEADSET

To connect the headset, insert the plug on the

headset cord into the socket marked HEADSET on

the left hand side of the telephone.

NOTE: Headsets used with this telephone must

comply with the standard EN6095

RECEIVING CALLS

When your telephone rings, the default path for the

call is to the handset. To receive it on the headset,

press HEADSET button once and the call is switched

to the headset. This action will be conﬁ rmed by LED

indication within the headset button. At the end of

the call, press the HEADSET button a second time

to turn the headset off.