ATL Product Berkshire 600 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ATL Product Berkshire 600. ATL Product Berkshire 600 8 pages.

Imprimer la page
SWITCHABLE MESSAGE WAITING
There are three versions of
indication supported within the Berkshire 600
telephone (MW 3, 8 and 10). This selection is made
via a 4 position switch located to the rear of the
phone, indicated by the letters 'MW'.
A 'Ring Indicator' position is provided that has the
additional benefi t of being activated by short ring
burst MW signals - see website for details.
In all cases, an LED in the top right hand corner
of the telephone is used to indicate the selected
functions and incoming calls.
Any questions you may have should be directed
in the fi rst instance to your telephone supplier with
details of your PABX.
Further concerns may also be addressed by calling
our Technical Support Dept. on 0845 421 0730 or
visiting our website, www.atltelecom.com
MODEM PORTS
Your Berkshire 600 comes with two modem ports
(BS6312 and RJ11) typically used for a PC modem,
or as points of connection for additional telephones.
HEARING AID COMPATIBILITY
For hearing aid users, an inductive coupler has
been installed in the handset of the Berkshire 600,
to improve audible effi ciency.
message waiting

Installation Notes

MESSAGE WAITING
MW3 is used by systems that use high voltage
DC signalling. MW8/10 however use line reversal
methods to indicate that a message is present.
PAUSE TIME ADJUSTMENT
The 'pause' key may be confi gured via the keypad to
represent 1 of 4 time periods (1~4 sec.). In all cases,
lift the handset, press SET, PAUSE, followed by a
numeric key (1~4) to set the pause time, replace
handset. Default = 1s.
TBR TIME ADJUSTMENT
Transfer break times may be adjusted from
100~600ms. in increments of 100ms. First confi rm
that the 2 position switch, identifi ed as RECALL on
the rear of the phone, is set to the 'T' position. Lift
the handset, press SET, TRANSFER, followed by a
numeric key (1~6), replace the handset. Default =
100ms.
PROGRAMMING PORT
The Berkshire 600 has an unidentifi ed port,
alongside the other confi guration switches, at the
rear of the telephone. Programming of this port is
limited to technicians trained in its use.