ATL Product Berkshire 600 Kullanıcı Kılavuzu - Sayfa 6

Telefon ATL Product Berkshire 600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ATL Product Berkshire 600 8 sayfaları.

Sayfayı Yazdır

1. User Guide

SWITCHABLE MESSAGE WAITING

There are three versions of

indication supported within the Berkshire 600

telephone (MW 3, 8 and 10). This selection is made

via a 4 position switch located to the rear of the

phone, indicated by the letters 'MW'.

A 'Ring Indicator' position is provided that has the

additional beneﬁ t of being activated by short ring

burst MW signals - see website for details.

In all cases, an LED in the top right hand corner

of the telephone is used to indicate the selected

functions and incoming calls.

Any questions you may have should be directed

in the ﬁ rst instance to your telephone supplier with

details of your PABX.

Further concerns may also be addressed by calling

our Technical Support Dept. on 0845 421 0730 or

visiting our website, www.atltelecom.com

MODEM PORTS

Your Berkshire 600 comes with two modem ports

(BS6312 and RJ11) typically used for a PC modem,

or as points of connection for additional telephones.

HEARING AID COMPATIBILITY

For hearing aid users, an inductive coupler has

been installed in the handset of the Berkshire 600,

to improve audible efﬁ ciency.

message waiting

Installation Notes

MESSAGE WAITING

MW3 is used by systems that use high voltage

DC signalling. MW8/10 however use line reversal

methods to indicate that a message is present.

PAUSE TIME ADJUSTMENT

The 'pause' key may be conﬁ gured via the keypad to

represent 1 of 4 time periods (1~4 sec.). In all cases,

lift the handset, press SET, PAUSE, followed by a

numeric key (1~4) to set the pause time, replace

handset. Default = 1s.

TBR TIME ADJUSTMENT

Transfer break times may be adjusted from

100~600ms. in increments of 100ms. First conﬁ rm

that the 2 position switch, identiﬁ ed as RECALL on

the rear of the phone, is set to the 'T' position. Lift

the handset, press SET, TRANSFER, followed by a

numeric key (1~6), replace the handset. Default =

100ms.

PROGRAMMING PORT

The Berkshire 600 has an unidentiﬁ ed port,

alongside the other conﬁ guration switches, at the

rear of the telephone. Programming of this port is

limited to technicians trained in its use.