Dremel GO DRAFT Manuel d'utilisation et de sécurité - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et de sécurité pour {nom_de_la_catégorie} Dremel GO DRAFT. Dremel GO DRAFT 13 pages.

IMPORTANT: Some of the following symbols may be used on your tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to operate the

tool better and safer.

Symbol

.../min

1, 2, 3, ...

I, II, III,

Designation / Explanation

Volts (voltage)

Amperes (current)

Hertz (frequency, cycles per second)

Diameter (size of drill bits, grinding wheels, etc.)

No load speed (rotational speed at no load)

Revolutions or reciprocation per minute (revolutions, strokes, surface speed,

orbits etc. per minute)

Off position (zero speed, zero torque...)

Selector settings (speed, torque or position settings. Higher number means

greater speed)

Infinitely variable selector with off (speed is increasing from 0 setting)

Arrow (action in the direction of arrow)

Alternating current (type or a characteristic of current)

Direct current (type or a characteristic of current)

Class II construction (designates double insulated construction tools)

This symbol designates that this tool complies with CEC California Energy

Commision energy efficiency requirements.

Designates Li-ion battery recycling program

Alerts user to read manual

Alerts user to wear eye protection

This symbol designates that this tool is listed by Underwriters Laboratories, to

United States and Canadian Standards.

This symbol designates that this tool is listed by the Canadian Standards

Association, to United States and Canadian Standards.

Symbols

-7-