Electrolux 42 Manuel du propriétaire et instructions d'installation - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et instructions d'installation pour {nom_de_la_catégorie} Electrolux 42. Electrolux 42 45 pages. 30” and 36” free-standing range hood
Également pour Electrolux 42 : Manuel d'installation, d'utilisation et d'entretien (22 pages)
Imprimer la page
1 REMOVE PACKAGING
CAUTION:
Top-Heavy—be careful when moving.
When using an appliance dolly, handle
from Freezer side only.
• Carefully cut banding at the top and
bottom; remove outer carton.
• Slide out rear corner posts (2).
• Slide carton off top of cabinet.
NOTE: DO NOT LAY CABINET DOWN
IN ORDER TO REMOVE SKID!
• The unit is secured to the skid with
six 7/16" bolts and six 1/2" nuts.
• Remove all six 7/16" bolts that secure
metal brackets to the refrigerator.
• Remove the three 1/2" nuts and washers
from the Freezer side.
• Remove nut from rear wood block
on Freezer side.
• Tilt unit up on Freezer side toward Fresh
Food side.
• Push bolts down, remove metal bracket
from Freezer side. Remove wood block
from Freezer side.
• Slide the appliance dolly underneath the
Freezer side.
• Using corner posts (2 on front corners)
to prevent damage, secure unit to
appliance dolly.
NOTE: If corner posts are too long, cut the
posts to a shorter length.
Installation Instructions
Refrigerator is
Toekick Taped to
Top of Unit
Metal
Bracket
1/2" Nuts
• Lift the unit off the skid with the appliance
dolly.
• Remove toekick taped to the top of the
unit.
• Set toekick aside for final installation.
CAUTION:
TO ROLL OR DRAG UNTIL UNIT IS OFF SKID.
CAUTION:
WATER LINE IS CLEAR OF APPLIANCE
DOLLY TO AVOID DAMAGE.
28
Bolts
DO NOT ATTEMPT
MAKE SURE THE