Electrolux 922728 Manuel d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Electrolux 922728. Electrolux 922728 28 pages. Built-in hood for electric and gas oven

Imprimer la page

1. Installation and Assembly

Hood weights

E.4

MODELS

922728

HOST11

922723

HOCT11E

922732

HOSS11

922727

HOCS11E

922725

HOCV11E

922730

HOSV11

922729

HOST21

922724

HOCT21E

922731

HOSS21

922726

HOCS21E

INSTALLATION AND ASSEMBLY

F.1 Place of installation

• The appliance must be installed in compliance

with the applicable local and national

regulations:

concerning air intake and exhaust;

the ventilation requirements specified for

cooking equipment must be met;

special precautions must be taken when

there are other naked-flame appliances in

the same room, to prevent the return of

fumes;

if the hood is installed over a gas appliance,

a non-self-resetting device that shuts off the

gas supply to the appliance if the hood

stops working must be fitted in accordance

with the national gas regulations;

hood installation must comply with the

applicable gas regulations.

• The following items must be connected to an

extraction system by means of the hood

exhaust hole. The system must only be

installed by authorised persons in accordance

with:

the required Aeraulic Performance (see

chap. E.2 – page 15);

the following manufacturer's installation

instructions;

the local rules and regulations regarding

extraction systems, municipal building,

electrical systems, water drainage, health

authorisations, and any other applicable

regulations on air intake and exhaust

systems.

150

170

152

172

115

168

185

170

190

922728

922729

922730

922732

922731

• Before installing the hood, make sure the oven

is installed in compliance with the Oven

Installation Manual (chap. F - "INSTALLATION

AND ASSEMBLY")

• for AUSTRALIA only:

This appliance can only be installed by

authorised persons and in accordance with the

manufacturer's installation instructions, local

gas fitting regulations, municipal building

codes, electrical wiring regulations, local water

supply regulations, AS5601-gas installation,

health authorities and any other applicable

regulations. The appliance must be installed in

accordance with AS / NZS 3500.1 and AS/NZS

3500.3 standards. This unit is supplied with a

Watermark certified backflow prevention

device.

F.2 Unpacking and transport

1. Cut the plastic straps fixing the appliance to

the pallet;

HOST11

HOST21

HOSV11

HOSS11

HOSS21