Electrolux DD9691-M Manuel d'installation et d'utilisation - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Electrolux DD9691-M. Electrolux DD9691-M 20 pages. Built-in- flat-screen fume extractor hood
Imprimer la page
USE
KEY
DISPLAY
A
B
C
Shows set speed
Shows selected
D
speed.
Shows P.5 by count-
ing down to five
E
minutes.
Shows the remain-
ing time before the
hood shuts down
F
(countdown). The
right down dot
flashes.
EN
FUNCTION
Switches the lights over the cooker on and off.
Switches the lights placed on top of the hood body on and off .
Switches the extractor motor on and off at the latest selected
speed. It also opens and closes the glass panel. By pressing this
key for about two seconds the glass opens and closes.
By pressing this key in sequence, it is possible to select the
speed.
Activates the highest extraction speed. After about 5 minutes it
goes back to any previously selected speed. It can be deacti-
vated by pressing this key again. (the central decimal display
dot flashes).
Sets the automatic delayed shut down of the appliance (De-
lay)according to the selected speed:
Speed 1 → delay 20 minutes
Speed 2 → delay 15 minutes
Speed 3 → delay 10 minutes
The recommended delay time can be changed by pressing this
key in sequence (5,10, 15, 20, 25 e 30 minutes). When the se-
lected time is over, the appliance will shut down automatically.
By pressing this key and selecting option 0, this function will
deactivate.
Indicates that the metal grease filters saturation alarm has been
triggered, and the filters need to be washed. The alarm is trig-
gered after 100 working hours. This indication shows only
when the motor is switched off.
Shows F
Reset alarm:
Please switch the motor off and press key D for about 3 seconds
until the display turns off.
Indicates that the charcoal filters saturation alarm has been trig-
gered, and the filter has to be replaced; the metal grease filters
must also be washed. The charcoal filter is triggered after 200
working hours. This indication shows only when the motor is
switched off. This kind of indication should be activated by
Shows C
following the procedures explained in the maintenance section
of the active charcoal filter.
Reset alarm:
Please switch the motor off and press key D for about 3 seconds
until the display turns off.
2 23