- ページ 13

換気フード Electrolux DD9691-MのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux DD9691-M 20 ページ。 Built-in- flat-screen fume extractor hood

ページを印刷する

USE

KEY

DISPLAY

Shows set speed

Shows selected

speed.

Shows P.5 by count-

ing down to five

minutes.

Shows the remain-

ing time before the

hood shuts down

(countdown). The

right down dot

flashes.

FUNCTION

Switches the lights over the cooker on and off.

Switches the lights placed on top of the hood body on and off .

Switches the extractor motor on and off at the latest selected

speed. It also opens and closes the glass panel. By pressing this

key for about two seconds the glass opens and closes.

By pressing this key in sequence, it is possible to select the

speed.

Activates the highest extraction speed. After about 5 minutes it

goes back to any previously selected speed. It can be deacti-

vated by pressing this key again. (the central decimal display

dot flashes).

Sets the automatic delayed shut down of the appliance (De-

lay)according to the selected speed:

Speed 1 → delay 20 minutes

Speed 2 → delay 15 minutes

Speed 3 → delay 10 minutes

The recommended delay time can be changed by pressing this

key in sequence (5,10, 15, 20, 25 e 30 minutes). When the se-

lected time is over, the appliance will shut down automatically.

By pressing this key and selecting option 0, this function will

deactivate.

Indicates that the metal grease filters saturation alarm has been

triggered, and the filters need to be washed. The alarm is trig-

gered after 100 working hours. This indication shows only

when the motor is switched off.

Shows F

Reset alarm:

Please switch the motor off and press key D for about 3 seconds

until the display turns off.

Indicates that the charcoal filters saturation alarm has been trig-

gered, and the filter has to be replaced; the metal grease filters

must also be washed. The charcoal filter is triggered after 200

working hours. This indication shows only when the motor is

switched off. This kind of indication should be activated by

Shows C

following the procedures explained in the maintenance section

of the active charcoal filter.

Reset alarm:

Please switch the motor off and press key D for about 3 seconds

until the display turns off.

2 23