Atlantic Technology 3.1 HSB Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Atlantic Technology 3.1 HSB. Atlantic Technology 3.1 HSB 12 pages. High performance front channel speaker base with powered h-pas subwoofer

Imprimer la page

Atlantic Technology 3.1 HSB Manuel d'instruction

Instruction Manual

the negative (-) leads to the black terminals. Look carefully at the wires you are using and

note that one of the conductors of each pair will typically be identiﬁ ed by color print-

ing on the outer jacket, ridges on the outer jacket, or a thread intertwined with the wire

strands. By convention, the marked wire is connected to the red (+) terminal. Also be

sure that no stray strands of wire touch across any terminals.

WARNING: To prevent risk of electrical shock or damage to your equipment, always

switch off the ampliﬁ er or receiver when making any system connections.

POWER SUPPLY: A separate power supply and power supply cable have been

included with your system. After the audio connections have been made, connect the

cable from the power supply to the DC IN jack on the rear of the speaker base. Then

connect the power supply cable to the power supply and plug it into an active outlet.

NOTE: The power supply provided is capable of operating from 100-240 volts 50-60Hz.

WARNING: Before turning on the A/V receiver, be certain that no stray wire strands are

touching across any terminals as this might damage it.

Finally, recheck the polarity of your front speakers by listening to some music with

good bass content. If the sound seems "hollow", unusually spread out, or seem to

have weak bass, reinspect your connections for proper polarity and correct any out of

phase connections.

SYSTEM WIRING DIAGRAM

A/V RECEIVER

RIGHT

contact Atlantic Technology for recommondations

POWER SUPPLY

LEFT

RIGHT

SURROUND

CENTER

LEFT

SUB OUT

optional surround speakers

(not included)

Tested to Comply with FCC Standards for Home or Office Use.

U.S. Patent 8,094,855 B2. H-PAS is a trademark of AT Int'l Corp,