Electrolux Vent Hood Manuel d'utilisation et d'entretien Instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien Instructions d'installation pour {nom_de_la_catégorie} Electrolux Vent Hood. Electrolux Vent Hood 16 pages.

Imprimer la page

Install support system

1. At hood location, install 2 X 4 cross framing between

ceiling joists using dimensions shown.

2. Finish the ceiling surface. Be sure to mark the location

of the ceiling joists and cross framing.

3. Secure the support frame bracket to joists and cross

framing with four screws provided (6x70mm) and four

washers (D. 6.4mm). Make sure screws are driven

into center of joists and framing for maximum strength.

4. Fix the support frame to the support frame bracket

with (4) 3.9x9.5mm mounting screws. Fig. 2.

5. Adjust the overall height of the support frame. Loosen

and re-tighten the 4 screws in the height adjustment

slots as necessary.

Installation

DRYWALL

FRONT

MOUNTING SCREWS

(3.9x9.5mm)

HEIGHT

ADJUSTMENT

SLOTS

TOP VIEW OF SUPPORT FRAME

CROSS FRAMING

CEILING JOISTS

WASHERS (Ø6.4mm)

MOUNTING SCREWS

(6x70mm)

FIG. 1

FRONT

SUPPORT

FRAME

FIG. 2