Electrolux Vent Hood 사용 및 관리 매뉴얼 설치 지침 - 페이지 7

{카테고리_이름} Electrolux Vent Hood에 대한 사용 및 관리 매뉴얼 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux Vent Hood 16 페이지.

Install support system

1. At hood location, install 2 X 4 cross framing between

ceiling joists using dimensions shown.

2. Finish the ceiling surface. Be sure to mark the location

of the ceiling joists and cross framing.

3. Secure the support frame bracket to joists and cross

framing with four screws provided (6x70mm) and four

washers (D. 6.4mm). Make sure screws are driven

into center of joists and framing for maximum strength.

4. Fix the support frame to the support frame bracket

with (4) 3.9x9.5mm mounting screws. Fig. 2.

5. Adjust the overall height of the support frame. Loosen

and re-tighten the 4 screws in the height adjustment

slots as necessary.

Installation

DRYWALL

FRONT

MOUNTING SCREWS

(3.9x9.5mm)

HEIGHT

ADJUSTMENT

SLOTS

TOP VIEW OF SUPPORT FRAME

CROSS FRAMING

CEILING JOISTS

WASHERS (Ø6.4mm)

MOUNTING SCREWS

(6x70mm)

FIG. 1

FRONT

SUPPORT

FRAME

FIG. 2