Electrolux Vent Hood 사용 및 관리 매뉴얼 설치 지침 - 페이지 6

{카테고리_이름} Electrolux Vent Hood에 대한 사용 및 관리 매뉴얼 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux Vent Hood 16 페이지.

Installation

To reduce the risk of fire, use only metal

ductwork.

1. Decide where the ductwork will run between the

hood and the outside.

2. A straight, short duct run will allow the hood to

perform most efficiently.

3. Long duct runs, elbows, and transitions will reduce

the performance of the hood. Use as few of them

as possible. Larger ducting may be required for best

performance with longer duct runs.

4. Install a roof or wall cap. Connect round metal

ductwork to cap and work back towards hood

location. Use duct tape to seal the joints between

ductwork sections.

5. Never make the size or area of the ductwork smaller

than the size that originates at the hood.

6. Bigger ductwork is better.

7. Keep duct lenght less than 50 linear feet.

8. Minimize use of elbows and transitions (4 or less).

9. Always separate 90 degree elbows with at least 2

feet of straight ductwork.

10. Place transitions at least 1 foot from the hood

outlet.

ROOF CAP

ROUND

DUCT

D E C O R A -

ROUND

T I V E

ELBOW

F L U E

HOOD

6" ADAPTER

24" TO 30" ABOVE

COOKING SURFACE

EAVE

VENT