Bosch 8 Series Manuel d'instruction - Page 39

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bosch 8 Series. Bosch 8 Series 48 pages. Combi steam oven
Également pour Bosch 8 Series : Manuel d'instructions d'installation (21 pages), Instructions de montage (4 pages), Manuel d'instructions pour l'installation et l'utilisation (16 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur et instructions d'installation (44 pages), Pour commencer (7 pages), Manuel d'instruction (32 pages), Manuel de l'utilisateur et instructions d'installation (32 pages), Manuel d'instruction (12 pages), Manuel de l'utilisateur et instructions d'installation (24 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur et instructions d'installation (28 pages), Manuel d'instructions pour l'installation et l'utilisation (20 pages), Manuel de l'utilisateur et instructions d'installation (44 pages), Manuel d'instruction (12 pages), Manuel de l'utilisateur et instructions d'installation (40 pages), Manuel de l'utilisateur et instructions d'installation (32 pages), Informations pour l'utilisation (20 pages)

Imprimer la page
Bosch 8 Series Manuel d'instruction
Fault
Tea or lipstick residue on
the utensils.
Coloured (blue, yellow,
brown), difficult to remove
to non-removable coatings
in the appliance or on
stainless steel utensils.
Discolouration of the
plastic parts inside the
appliance.
Plastic parts discoloured.
Removable streaks on
glasses, glasses with
metallic appearance and
cutlery.
Cause
Too low rinsing temperature.
Too little or unsuitable detergent. Use suitable detergent at correct dosage.
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Film formation consisting of
ingredients from vegetables (e.g.
cabbage, celery, potatoes,
noodles, ...) or the tap water (e.g.
manganese).
Film formation caused by metallic
components on silver or
aluminium utensils.
Plastic parts inside the appliance
may become discoloured during
the service life of the dishwasher.
Too low rinsing temperature.
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Too much rinse aid.
No rinse aid added or setting too
low.
Detergent residue in the final
rinse programme section.
Detergent dispenser cover
blocked by utensils (cover does
not open fully).
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Fault, what to do? en
Remedial action
Select programme with higher washing
temperature.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
Can be partly removed with machine
cleaner or by mechanical cleaning.
Coatings are harmless.
Can be partly removed with machine
cleaner or by mechanical cleaning.
Discolouration is normal and will not
impair the function of the dishwasher.
Select programme with higher washing
temperature.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
Set rinse aid amount to lower setting.
Add rinse aid and check dosage
(recommended setting 4–5).
Detergent dispenser cover must not be
obstructed by utensils.
Do not place utensils or fragrance
dispenser in the tablet collecting tray.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
39