Bosch 8 Series Kullanım Kılavuzu - Sayfa 39

Elektrikli Süpürge Bosch 8 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch 8 Series 48 sayfaları. Combi steam oven
Ayrıca Bosch 8 Series için: Kurulum Talimatları Kılavuzu (21 sayfalar), Montaj Talimatları (4 sayfalar), Kurulum ve Kullanım Kılavuzu için Talimatlar (16 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (44 sayfalar), Başlarken (7 sayfalar), Kullanım Kılavuzu (32 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (32 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (24 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (28 sayfalar), Kurulum ve Kullanım Kılavuzu için Talimatlar (20 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (44 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (40 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (32 sayfalar), Kullanım Bilgileri (20 sayfalar)

Sayfayı Yazdır
Bosch 8 Series Kullanım Kılavuzu
Fault
Tea or lipstick residue on
the utensils.
Coloured (blue, yellow,
brown), difficult to remove
to non-removable coatings
in the appliance or on
stainless steel utensils.
Discolouration of the
plastic parts inside the
appliance.
Plastic parts discoloured.
Removable streaks on
glasses, glasses with
metallic appearance and
cutlery.
Cause
Too low rinsing temperature.
Too little or unsuitable detergent. Use suitable detergent at correct dosage.
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Film formation consisting of
ingredients from vegetables (e.g.
cabbage, celery, potatoes,
noodles, ...) or the tap water (e.g.
manganese).
Film formation caused by metallic
components on silver or
aluminium utensils.
Plastic parts inside the appliance
may become discoloured during
the service life of the dishwasher.
Too low rinsing temperature.
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Too much rinse aid.
No rinse aid added or setting too
low.
Detergent residue in the final
rinse programme section.
Detergent dispenser cover
blocked by utensils (cover does
not open fully).
Utensils precleaned too intensely;
sensors therefore decide on
weak programme sequence.
Stubborn soiling cannot be
completely removed.
Fault, what to do? en
Remedial action
Select programme with higher washing
temperature.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
Can be partly removed with machine
cleaner or by mechanical cleaning.
Coatings are harmless.
Can be partly removed with machine
cleaner or by mechanical cleaning.
Discolouration is normal and will not
impair the function of the dishwasher.
Select programme with higher washing
temperature.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
Set rinse aid amount to lower setting.
Add rinse aid and check dosage
(recommended setting 4–5).
Detergent dispenser cover must not be
obstructed by utensils.
Do not place utensils or fragrance
dispenser in the tablet collecting tray.
Do not prerinse utensils. Remove only
large food remnants.
Increase sensitivity of the sensors.
~ "Sensor setting" on page 28
39