ABSCO SHEDS 15151SK Manuel d'assemblage et d'instruction - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage et d'instruction pour {nom_de_la_catégorie} ABSCO SHEDS 15151SK. ABSCO SHEDS 15151SK 20 pages. N3/c1 frame kit
Également pour ABSCO SHEDS 15151SK : Manuel d'assemblage (20 pages)

ABSCO SHEDS 15151SK Manuel d'assemblage et d'instruction
ROOF BRACING
1. Align the roof framing along the midpoint of
the roof, running perpendicular to the roof sheet
corrugations. This may require two people.
3. Proceed to drill a hole in every 2nd flat section
of the roof sheet.
4. While one person holds the roof brace in
position use hex head teks screws with neoprene
washers to fix the framing from the outside of the
shed.
TEK SCREW W/ NEO
WASHER 10-16x16mm
IMPORTANT: Do not sit, stand or walk on the roof
or apply unnecessary pressure of the sheeting
during this step.
5. Place a BKT17 to either end of the roof brace
using 8 tek screws as shown to the right.
The roof lip may need to be removed in order
to fit the four tek screws from the outside of the
shed.
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
HEX HD
2. Using a marker trace along one edge of the
channel onto the roof sheet as shown.
Next measure 20mm in from this line and mark
again, this will the centreline of the bracing.
Model: CYC15
Two multipurpose
brackets, BKT17, are
used per roof brace.
02/03/2021
1.0
16