- ページ 16

屋外倉庫 ABSCO SHEDS 15151SKのPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ABSCO SHEDS 15151SK 20 ページ。 N3/c1 frame kit
ABSCO SHEDS 15151SK にも：組立マニュアル (20 ページ)

ROOF BRACING

1. Align the roof framing along the midpoint of

the roof, running perpendicular to the roof sheet

corrugations. This may require two people.

3. Proceed to drill a hole in every 2nd flat section

of the roof sheet.

4. While one person holds the roof brace in

position use hex head teks screws with neoprene

washers to fix the framing from the outside of the

shed.

TEK SCREW W/ NEO

WASHER 10-16x16mm

IMPORTANT: Do not sit, stand or walk on the roof

or apply unnecessary pressure of the sheeting

during this step.

5. Place a BKT17 to either end of the roof brace

using 8 tek screws as shown to the right.

The roof lip may need to be removed in order

to fit the four tek screws from the outside of the

shed.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

HEX HD

2. Using a marker trace along one edge of the

channel onto the roof sheet as shown.

Next measure 20mm in from this line and mark

again, this will the centreline of the bracing.

Model: CYC15

Two multipurpose

brackets, BKT17, are

used per roof brace.

02/03/2021

1.0