- ページ 14

屋外倉庫 ABSCO SHEDS 15151SKのPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ABSCO SHEDS 15151SK 20 ページ。 N3/c1 frame kit
ABSCO SHEDS 15151SK にも：組立マニュアル (20 ページ)

BRACING FOR SIDE WALLS

Construction for the side wall, on the door side, is different due to a door stud.

1. Take the two frame pieces for the side wall, and partially box them together, do not tek screw yet.

2. Place one end of the piece 120mm from the outside of the front wall as shown below.

3. Slide apart pieces apart until they make contact with it and the brace on the back wall. This is shown

below.

One end of the wall brace dimensioned from the

outside of the front wall.

*For 15141RK this C1220 should be trimmed to 1190mm to help the door stud fit the wall brace.

Now the horizontal wall framing is at the correct length proceed to fix them together and then use tek

screws to fix it to the side wall from the outside of the shed at 148mm spacings.

Use corner brackets (BKT10) to secure the rear,

side and front wall braces together. Position as

shown and fix using four tek screws. Pre-drilling

the bracket with a 3mm drill bit will make this

easier.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

C1220

C1220*

The other end of the brace butting up against

C1220

the back wall brace.

Model: CYC15

C0660

02/03/2021

1.0