Bose 300PM Manuel d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Bose 300PM. Bose 300PM 16 pages.
Également pour Bose 300PM : Manuel (13 pages)

Imprimer la page

DISASSEMBLY/ASSEMBLY PROCEDURES (CONT.)

6.4 Gently slide the crossover assembly

onto the tabs on the binding post connector

until it is seated.

6.5 Secure the crossover assembly using

the four screws (8) removed in

procedure 5.

6.6 Replace the batting removed in

procedure 5.2.

6.7 Replace the driver (3) and grille (1)

using procedure 4.

7. Binding Post Connector removal

7.1 Remove the grille (1), driver (3), and

crossover assembly (9) using procedure 5.

7.2 Remove the four screws (2) that

secure the binding post connector (10) to

the speaker cabinet.

7.3 Gently pull on the binding post

connector housing until it comes free of the

cabinet.

8. Binding Post Connector replacement

8.1 Slide the binding post connector (10)

into the rear of the cabinet. Be sure it is

oriented so that the + and - markings on

the binding post connector are nearest the

edge of the cabinet.

8.2 Secure the binding post connector to

the cabinet using the four screws (2)

removed in procedure 7.2. Be sure not to

overtighten the screws, or you will crack the

binding post connector housing.

8.3 Reinstall the crossover assembly (9),

driver (3), and grille (1) using procedure 6.