Bose 802 C II Manuel du propriétaire - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose 802 C II. Bose 802 C II 22 pages. System controllers
Également pour Bose 802 C II : Manuel d'entretien (20 pages), Manuel d'entretien (23 pages)

Imprimer la page

Input MODE switch in position : FR (full-range)

Input MODE switch in position : BA (bi-amp)

Input MODE switch in position 4: OPT (option)

Figure 18

mode.

Figure 19

mode.

Figure 20

mode.

Input Mode

This is a four-position switch. It selects one of three

operating modes for the controller.

Position 1: Full-range (FR) mode. (See Figure 8.)

Use for a full-range system with only 40

loudspeakers. Connect only the controller's HIGH

FREQ OUTPUT jacks. Do not connect any amplifiers

or loudspeakers to the LOW FREQ OUTPUT jacks.

Position 2: Bi-amplified (BA) mode. (See Figure

9.) Use for a 40 or 80 system with 50

50BP Acoustimass

bass enclosures. Connect

the controller's HIGH FREQ OUTPUT jacks to the

amplifier(s) driving the 40 or 80 loudspeakers.

Connect the controller's LOW FREQ OUTPUT jacks

to the amplifier(s) driving the bass enclosure.

Position 3: No connection (NC). Do not use. It is

not connected in this version of the 40C or 80C II

controller.

Position 4: Option (OPT) mode. (See Figure 0.)

Use when the system includes an Acoustic Wave

Cannon

System II loudspeaker. The corresponding

AWCS

OC- option card MUST be installed by authorized

Bose personnel in the controller to achieve correct

performance of the system. Connect the controller's

LOW FREQ OUTPUT jacks to the amplifier(s) driving

the bass.

or 80

B or