Bose 802 C II 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Bose 802 C II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 802 C II 22 페이지. System controllers
Bose 802 C II에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지), 서비스 매뉴얼 (23 페이지)

페이지 인쇄

Input MODE switch in position : FR (full-range)

Input MODE switch in position : BA (bi-amp)

Input MODE switch in position 4: OPT (option)

Figure 18

mode.

Figure 19

mode.

Figure 20

mode.

Input Mode

This is a four-position switch. It selects one of three

operating modes for the controller.

Position 1: Full-range (FR) mode. (See Figure 8.)

Use for a full-range system with only 40

loudspeakers. Connect only the controller's HIGH

FREQ OUTPUT jacks. Do not connect any amplifiers

or loudspeakers to the LOW FREQ OUTPUT jacks.

Position 2: Bi-amplified (BA) mode. (See Figure

9.) Use for a 40 or 80 system with 50

50BP Acoustimass

bass enclosures. Connect

the controller's HIGH FREQ OUTPUT jacks to the

amplifier(s) driving the 40 or 80 loudspeakers.

Connect the controller's LOW FREQ OUTPUT jacks

to the amplifier(s) driving the bass enclosure.

Position 3: No connection (NC). Do not use. It is

not connected in this version of the 40C or 80C II

controller.

Position 4: Option (OPT) mode. (See Figure 0.)

Use when the system includes an Acoustic Wave

Cannon

System II loudspeaker. The corresponding

AWCS

OC- option card MUST be installed by authorized

Bose personnel in the controller to achieve correct

performance of the system. Connect the controller's

LOW FREQ OUTPUT jacks to the amplifier(s) driving

the bass.

or 80

B or