Bose 802 C II 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Bose 802 C II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 802 C II 22 페이지. System controllers
Bose 802 C II에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지), 서비스 매뉴얼 (23 페이지)
페이지 인쇄
5.5 Mechanical Connections
The 40
C and 80
C II systems controllers are
⁄
"
TM
®
3
4
high (U). They fit a standard 9" rack. Use screws
or bolts that fit the rack you are using. Note the
maximum depth of the rack as shown in Figure 6.
.4"
44. cm
8"
0.3 cm
.5"
."
3.8 cm
4.3cm
9"
48.3 cm
Figure 16
Make sure the rack will hold the controller.
5.6 Basic operation
These controls are on the rear panel of the 40C or
80C II systems controllers.
InPuT leVel
These switches for each input channel adjust the
sensitivity between -0 dB and +4 dB (Figure ).
To find the nominal output level of the output device
(mixer, signal processor), consult its owner's guide
or call the manufacturer. Set the controller INPUT
LEVEL switch to the closest number possible.
Do not to overload the inputs of the controller. Set
the INPUT LEVEL switch, and adjust the output
device's control(s). Keep the signal below the
controller's maximum input level (+4 dBm or .3V
RMS).
Figure 17
The INPUT LEVEL sensitivity switches.
3