Bose 802 C II Kullanıcı El Kitabı - Sayfa 13

Konuşmacılar Bose 802 C II için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose 802 C II 22 sayfaları. System controllers
Ayrıca Bose 802 C II için: Servis Kılavuzu (20 sayfalar), Servis Kılavuzu (23 sayfalar)

Sayfayı Yazdır

5.5 Mechanical Connections

The 40

C and 80

C II systems controllers are

⁄

high (U). They fit a standard 9" rack. Use screws

or bolts that fit the rack you are using. Note the

maximum depth of the rack as shown in Figure 6.

.4"

44. cm

0.3 cm

.5"

3.8 cm

4.3cm

48.3 cm

Figure 16

Make sure the rack will hold the controller.

5.6 Basic operation

These controls are on the rear panel of the 40C or

80C II systems controllers.

InPuT leVel

These switches for each input channel adjust the

sensitivity between -0 dB and +4 dB (Figure ).

To find the nominal output level of the output device

(mixer, signal processor), consult its owner's guide

or call the manufacturer. Set the controller INPUT

LEVEL switch to the closest number possible.

Do not to overload the inputs of the controller. Set

the INPUT LEVEL switch, and adjust the output

device's control(s). Keep the signal below the

controller's maximum input level (+4 dBm or .3V

RMS).

Figure 17

The INPUT LEVEL sensitivity switches.