Bose Panaray LT9402 III Mid/High Manuel de référence - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Bose Panaray LT9402 III Mid/High. Bose Panaray LT9402 III Mid/High 40 pages. Panaray lt series iii
Également pour Bose Panaray LT9402 III Mid/High : Manuel d'installation (32 pages), Manuel d'entretien (27 pages)

Imprimer la page

To Replace the V-2 Mid-frequency Driver in the Panaray

LT 9402

-III or LT 9702

1. Turn off the ampliﬁer power.

2. Disconnect the loudspeaker input connection(s).

3. The LT 4402-III, LT 9402-III and LT 9702-III use two V2 drivers. Remove the four screws securing each V2 driver to the

cabinet.

CAUTION: Be careful not to let the driver fall out of the cabinet.

4. Disconnect the following:

• For the top V2, disconnect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, disconnect the BLACK (+) and BLUE (-) wires.

5. Replace the damaged V2 driver.

6. Make the following connections:

• For the top V2, connect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, connect the BLUE (+) and BLACK (-) wires.

7. Secure each V2 driver to the cabinet with the four screws (on each V2).

8. Reconnect the input connections.

9. Turn on ampliﬁer power.

-III Loudspeakers

Service Information

LT 4402

-III,